Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2020-01-22 06:53
294
Company Profile
By certification [File Integrity]
Contact：lianheele(Mr.)
Email：
Telephone：
Phone：
Area：Zhejiang
Address：Zhejiang
Website：http://www.lhe-connector.com/ http://lianheele.china-teerle.com/
Product Description:
Original part Number: |
MG610278-5 |
LHE Part Number: |
218000110285 |
Number of Positions: |
1 |
Contact Tab Size Series |
1.8 |
Size (MM): |
L28.5 W11 H7.5 |
Seal or Unseal: |
Seal |
Overview:
Certification: |
TUV, IATF16949, ISO14001, ISO9001, CQC, UL, RoHS |
MOQ: |
Most product not have MOQ, Small order can be accepted. |
Sample service: |
Free Samples |
Delivery Time: |
3-5 Days |
Quality Control |
All goods will be 100% inspected before dispatched |
Payment: |
T/T, Western Union, MoneyGram, PayPal; 30% deposits; 70% balance before delivery. |
Shipment: |
DHL/FedEx/TNT/UPS/EMS/Aramex/SF for samples, By Air or by Sea for batch goods; Airport/ Port receiving. |
Tit:
In all the electrical connection parts, we first look for a relatively simple point of view. We will talk about some practical problems in the electrical connection in a specific case. In the battery system, the electrical connection used to connect the modules does not vary with the shape of the battery cells. The following is a plan for the electrical connection of the soft case and the cylindrical module.
1. Rigid copper bars: long conductors made of copper with a rectangular or chamfered (rounded) rectangular cross-section, called aluminum bars made of aluminum, which carry current and connect electrical equipment in the circuit effect.
2. Soft copper busbar: Flexible busbars are made by stacking multiple layers of corona-resistant flat thin copper sheet conductors, and the outer layer is made of an insulating layer covered by extrusion.
3. Round wire: We used it a lot before, and now it has a lot of use. We will review the preface separately. The main reason for not using it is the spacing of the module layout
1) The bending radius of the cable depends on the material of the cable (copper, aluminum, etc.), the cross section of the conductor, and the insulation layer. According to everyone's experience, it is generally necessary to consider that the bending radius of the cable is 6-8 times the cable diameter, and the selection of the wire nose must meet the requirements.
2) It is another practice to use a blade type connector such as BMW or Toyota. In general, let's talk about the traditional screwed electrical connection method. Based on the need of the blade type, it is pulled apart
http://www.lhe-connector.com/
